Epson ActionNote 866C Gebruikershandleiding - Pagina 36

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson ActionNote 866C. Epson ActionNote 866C 47 pagina's. Product support bulletin(s)
Ook voor Epson ActionNote 866C: Handleiding productinformatie (11 pagina's), Product ondersteunings bulletin (3 pagina's), Instructies voor programmering (1 pagina's)

ATA * card configuration options

Option

Try Primary ATA Address**

Try Secondary ATA Address

Try Any Linear ATA Address

* Includes both ATA flash cards and ATA rotating-media cards.

** Select this option only when you know that no other disk installed on your

computer uses the primary ATA address.

Note

When you enable all three of the ATA card configuration

options, the software uses whatever addresses are available.

Changing the Card Insertion Parameters

Normally, your system beeps when you insert or remove a

card or when you have a configuration conflict. When you

select the Edit Configuration option from the File

pull-down menu, you see the Edit Configuration menu. This

menu contains the Card Insertion Parameters option,

which allows you to specify beep criteria for your system.

Note

If you change these parameters, make sure you select the

Save Configuration option from the File pull-down

menu to save your changes.

3-6

Using CardSoft

Function

Configures ATA cards using the

standard primary ATA addresses

Configures ATA cards using the

standard secondary ATA addresses

Configures ATA cards using the

linear-address mode available on

most cards