Epson ColorBurst RIP Product ondersteunings bulletin - Pagina 10
Blader online of download pdf Product ondersteunings bulletin voor {categorie_naam} Epson ColorBurst RIP. Epson ColorBurst RIP 17 pagina's. Image clipping update for stylus pro 4000
Ook voor Epson ColorBurst RIP: Aan de slag (13 pagina's), Aan de slag handleiding (10 pagina's)
Pagina afdrukken
5.5.1
Give your user defined paper size a name, we will use
"10 X 8" for this example.
5.5.2
Give your user defined paper size a Width of 10" (1000
x .01) and a Height of 8" (800 x .01).
5.5.3
Click Save then OK.
5.6
Under the Paper tab choose the following settings:
EPSON Professional Graphics Group
5.6.1
For Paper Source select Roll Paper.
5.6.2
Check Select Borderless then select Auto Expand from
the drop down menu.
5.6.3
From the Auto Cut drop down menu select the "Single
Cut or "Double Cut" option for borderless prints.
(See the "Cutting Option" section for cutting selection details)
Selecting an incorrect cut option, will result
in an unnecessary margin before or after
the printed image.
5.6.4
Under Paper Size make sure your User Defined paper
size of 10 X 8 is selected from the drop down list.
5.6.5
After all Paper selections are correct click on the Main
tab
5.6.6
On the Main screen do not select the "Print Preview"
option. If selected you will have a margin between
prints like the example shown under "CUTTING
OPTIONS" for Double Cut. This is due to the delay in
spooling the jobs to printer because of the preview.
As a result they are handled as if they were individual
print requests. To eliminate the margin between prints
when multiple jobs are spooling turn Off the Print Pre-
view driver option.
Page 6 of 8.