Epson FX-1180 - Impact Printer Beknopte handleiding - Pagina 18

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Epson FX-1180 - Impact Printer. Epson FX-1180 - Impact Printer 33 pagina's. Epson serial impact dot matrix printers
Ook voor Epson FX-1180 - Impact Printer: Installatiehandleiding (33 pagina's), Brochure & specificaties (24 pagina's), Productinformatie (17 pagina's), Snelle referentiehandleiding (16 pagina's), Handmatig (11 pagina's), Specificatie (2 pagina's), Handmatig (18 pagina's), Specificaties (2 pagina's), Beperkte garantie (1 pagina's), Referentiehandleiding (34 pagina's)

Single Sheets with the Single-Bin Cut-Sheet Feeder

The single-bin cut-sheet feeder holds up to

50 sheets of paper. When it is installed, you

still can use the paper guide to load single

sheets and envelopes one at a time.

Note:

It is recommended that you close the flap on the

front cover if paper is not loaded from the front

slot.

Follow these steps to load paper in the

single-bin cut-sheet feeder:

Caution:

Do not load multipart forms, carbon

paper, envelopes, or labels in the

single-bin cut-sheet feeder.

Downloaded from:

http://www.usersmanualguide.com/

EPSON FX-880+/FX-1180+ Quick Guide

1. Make sure the paper guide is removed,

and set the paper release lever to the

single-sheet position. Also make sure the

paper-thickness lever (located under the

printer cover) is set to 0.

2. Slide the left paper guide of the cut-sheet

feeder so it is aligned with the triangle

mark. Next, slide the right paper guide

to roughly match the width of your

paper. Slide the paper support midway

between the paper guides.

1. Paper guides

2. Paper support

Single Sheets with the Single-Bin Cut-Sheet Feeder (1/2)