Epson FX-1180 - Impact Printer Beknopte handleiding - Pagina 7

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Epson FX-1180 - Impact Printer. Epson FX-1180 - Impact Printer 33 pagina's. Epson serial impact dot matrix printers
Ook voor Epson FX-1180 - Impact Printer: Installatiehandleiding (33 pagina's), Brochure & specificaties (24 pagina's), Productinformatie (17 pagina's), Snelle referentiehandleiding (16 pagina's), Handmatig (11 pagina's), Specificatie (2 pagina's), Handmatig (18 pagina's), Specificaties (2 pagina's), Beperkte garantie (1 pagina's), Referentiehandleiding (34 pagina's)

Pagina afdrukken
Epson FX-1180 - Impact Printer Beknopte handleiding

Error Indicators

You can identify many common printer problems using the lights on the control panel. If your printer
stops working and one or more control panel lights are on or flashing or the printer beeps, use the
following table to diagnose and fix the problem. If you cannot fix your printer problem using this
table.
State of
panel lights
n Paper Out
n Pause
n Pause
f Paper Out
n Pause
f Pause
f Paper Out
f Pause
f Tear Off/Bin
f f Pitch
f f Font
n = on, o = off, f = flashing
••• = short series of beeps (three beeps), ••••• = long series of beeps (five beeps)
Note:
The printer beeps once if you press a control panel button when the corresponding function is not available.
Downloaded from:
http://www.usersmanualguide.com/
Beep
Problem
pattern
Solution
No paper is loaded in the selected paper source.
•••
Load paper in the printer or select a different paper source; the Paper Out light goes off.
Then press the Pause button; the Pause light goes off and the printer starts printing.
The paper is not loaded correctly.
•••
Remove your paper and reload it correctly. See "Continuous Paper with the Pull Tractor" or
"Single Sheets with the Paper Guide" for instructions on loading the type of paper you want
to use.
The paper release lever is set to the wrong position.
•••
Set the paper release lever to the position for the paper source you want to use. If paper
from another paper source is currently in the paper path, press the Load/Eject button to
eject the paper; then move the paper release lever to the desired position.
A single sheet of paper is not fully ejected.
•••
Press the Load/Eject button to eject the sheet.
Continuous paper is not fed to the standby position.
•••
Tear off the printed page at the perforation; then press the Load/ Eject button. The printer
feeds the paper to the standby position.
Paper is jammed in the printer.
•••
To clear the paper jam, see "Clearing Paper Jams" in the Reference Guide.
—
The print head is overheated.
Wait for a few minutes; the printer resumes printing automatically once the print head cools.
An unknown printer error has occurred.
•••••
Turn off the printer and leave it off for several minutes; then turn on the printer again. If the
error recurs, contact your dealer.
EPSON FX-880+/FX-1180+ Quick Guide
Error Indicators (1/1)