Epson FX-880 - Impact Printer Snelle referentie - Pagina 5

Blader online of download pdf Snelle referentie voor {categorie_naam} Epson FX-880 - Impact Printer. Epson FX-880 - Impact Printer 12 pagina's. Warranty statement
Ook voor Epson FX-880 - Impact Printer: Specificatieblad (2 pagina's), Installatiehandleiding (10 pagina's), Productinformatie (17 pagina's), Snelle referentiehandleiding (16 pagina's), Handmatig (11 pagina's), Specificatie (2 pagina's), Belangrijke informatie Handleiding (8 pagina's), Montagehandleiding (8 pagina's), Beperkte garantie (1 pagina's)

Make sure the left and right sprockets are

positioned properly for your paper's width. If

they are too far apart or there is any slack in

the paper, you need to move the sprockets.

For details, see Chapter 3 of your User's Guide.

1. If you are using the front push tractor,

remove the front cover.

If you are using the rear push tractor,

remove the paper guide.

2. Open both sprocket covers.

3. Fit the first four holes of the paper over the

sprocket pins (as shown to the right).

4. Close the sprocket covers.

5. If you are using the front push tractor,

reattach the front cover.

If you are using the rear push tractor,

reattach the paper guide.

6. Make sure the paper release lever is in the

correct position.

7. Make sure that the paper guide is lying flat

on the printer and the continuous paper

support is in the upright position.

Loading Continuous Paper

With the Push Tractor

Front push tractor

Load paper printable side up.

Rear push tractor

Load paper printable side down.