Epson Image Authentication System Gebruikershandleiding - Pagina 6
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson Image Authentication System. Epson Image Authentication System 22 pagina's. For photopc 700, photopc 750z cameras
Ook voor Epson Image Authentication System: Gebruikershandleiding (24 pagina's)
![Epson Image Authentication System Gebruikershandleiding](/uploads/products/server2/619933/619933.png)
Installing IAS
Follow these steps to install IAS:
1. Insert the EPSON Image Authentication
System CD into your CD-ROM drive.
2. Click the Start button, then click Run .
3. Type D: \SETUP (where D is the letter of the
CD-ROM drive) and click OK to start the
installation program.
4. Follow the instructions on your screen.
Uploading IAS to Your Camera
EPSON Image Authentication System only
verifies the authenticity of pictures taken after
the IAS program is uploaded to your camera.
You can use this procedure both to upload IAS
to your camera and to verify that IAS is loaded
on a camera.
Before you start, make sure you have the serial
cable that came with your camera. Also, either
use an AC adapter or make sure your camera has
a fully charged set of batteries.
3