Epson LQ-590 Gebruikershandleiding - Pagina 21

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson LQ-590. Epson LQ-590 48 pagina's. 24pin dot matrix printers
Ook voor Epson LQ-590: Handmatig (11 pagina's), Snelle referentie (12 pagina's), Technisch overzicht (7 pagina's), Specificaties (2 pagina's), Specificaties (2 pagina's), Specificaties (4 pagina's), Start Here (2 pagina's)

10. Attach the front cover with

the continuous paper

positioned as shown.

11. Make sure the paper guide is

lying flat on the printer and

slide the edge guides to the

middle of the paper guide.

12. Turn on the printer. When the printer receives data, it automatically

loads the paper and starts printing.

If the first line on your page appears too high or low, you can change its

position using the Micro Adjust function as described on page 33.

Additionally, when using the push tractor, it is a good idea to set the

Auto tear-off function in the Default Setting mode to On. See page 38

for more information.

Caution:

Never use the knob to adjust the top-of-form position; this may damage the

printer or cause it to lose the top-of-form position.

Loading Continuous Paper with the

Rear Push Tractor

Make sure the printer is turned off, the tractor is installed in the rear

push position, and the paper guide is removed. (You may need to

move the tractor from the front push or pull position.)

Set the paper release lever to the rear push tractor position.

Release the left and right

sprockets by pulling the

blue sprocket lock levers

forward.

Paper Handling