ECI LiteWizard Installatiehandleiding - Pagina 5
Blader online of download pdf Installatiehandleiding voor {categorie_naam} ECI LiteWizard. ECI LiteWizard 9 pagina's.
When you see the "exclamation point" icon in the left-hand margin, the paragraph to its
immediate right will be a warning. This information could prevent injury, loss of property, or
even death in extreme cases. Any warning in this manual should be regarded as critical
information that should be read in its entirety. The word WARNING: in boldface will mark
the beginning of the text.
5 Safety Information
Knowing the safety hazards related to any procedure you are about to perform, know what
equipment has been specified for each specific contact, and know what tools and materials you
should plan to have available beforehand. Before connecting electrical wiring, take precautions
to prevent accidents from happening to yourself and other
people around you. Always consider safety first!
•
Wear a hard hat when working in the hoistway.
•
Wear safety glasses or goggles when using power tools.
•
Always wear protective gloves when installing or removing access covers, conduits, wire
way or electrical devices.
•
When working on car canopy, always be aware of where the sides of the car are
•
located.
•
Use properly grounded cords and power equipment (ground fault circuit interrupters).
•
Make sure there are proper clearances in hoistway between the car and other devices.
•
Before connecting wiring, cover sharp edges to keep hands and arms from being cut.
•
Always assume that a circuit is live, disconnect power from all related circuits before
proceeding with wiring.
•
Clear wiring sites of any unnecessary materials or equipment.
•
Always know where other people are and how the elevator wiring can affect their safety.
•
Safety lock and tag out procedures are always required before performing any kind of
service, repair, adjustment, lubrication or inspection of power driven equipment. These
procedures help to prevent injury or death caused by power driven equipment.
•
To reduce the danger of electrical shock, always make sure electrical connections are
secure. Also, make sure no bare wires are exposed after pulling electrical cable.
•
Use a circuit tester to be certain the circuit is not active before touching it.
LiteWizard™ Installation Manual
Electronic Controls, Inc.
7073 North Atlantic Ave. Cape Canaveral, FL 32920
800-633-9788
www.eciamerica.com
P a g e
| 5