Toshiba Z835-ST8305 Handleiding - Pagina 27

Blader online of download pdf Handleiding voor {categorie_naam} Toshiba Z835-ST8305. Toshiba Z835-ST8305 32 pagina's. Toshiba portege z830-bt8300: reference guide

Pagina afdrukken
4
Close the remaining programs one by one by selecting the
program name, then End Task.
Closing all programs should allow you to continue working. If
it does not, power off your computer and then restart it.
Problems when you turn on the computer
These problems may occur when you turn on the power.
The computer will not start.
Make sure you attached the AC adaptor and power cord/cable
properly.
Press and hold the power button for at least 10 seconds.
If you are using the AC adaptor, check that the wall outlet is
working by plugging in another device, such as a lamp.
Verify that the computer is on by looking at the ON/OFF indicator.
If the indicator is glowing, the computer is on. Also, try turning the
computer off and then on.
If you are using an AC adaptor, verify that the computer is receiving
power from the external power source by looking at the AC power
light. If the indicator is glowing, the computer is connected to a live
external power source.
The computer starts but when you press a key nothing
happens.
Verify that the active program accepts text input. Try clicking your
mouse on an area where you can type text and try typing again.
Your computer may be in Sleep mode and have a software or
resource conflict. When this happens turning the power on returns
you to the problem instead of restarting the system. To clear the
condition, press
computer via software, or follow the steps if your program stops
responding (see "Problems that are easy to fix" on page 26).
The keyboard produces unexpected characters.
A keypad overlay may be on. If the numlock light or cursor control
overlay light is on, press
overlay light, or
If the problem occurs when both the keypad overlays are off, make
sure the software you are using is not remapping the keyboard.
Refer to the software documentation and check that the program
does not assign different meanings to any of the keys.
,
, and
simultaneously. Then shut down the
Ctrl
Alt
Del
Fn + F10
to turn off the numlock light.
Fn + F11
If something goes wrong
to turn off the cursor control
27