Dimplex BF33STP Praktische gebruikershandleiding - Pagina 10

Blader online of download pdf Praktische gebruikershandleiding voor {categorie_naam} Dimplex BF33STP. Dimplex BF33STP 15 pagina's. Fireplace
Ook voor Dimplex BF33STP: Gebruikershandleiding (14 pagina's), Servicehandleiding (20 pagina's), Gebruikershandleiding (14 pagina's), Handleiding voor probleemoplossing (2 pagina's), Gebruikershandleiding (14 pagina's), Installatiehandleiding (14 pagina's)

To access the light bulb area (BF33DXP, BF39DXP models)

1. Open steel curtain (remove glass doors if applicable).

2. Remove two screws on log bracket and set aside. (FIGURE 3)

3. Pull front edge of plastic ember bed or plastic grate up and forward until rear tab

releases from the ledge located at the bottom of the mirror.

(FIGURE 4)

Note: Log set fits tightly into firebox, some force

may be necessary to remove.

4. Set logset in front of firebox.

5. Disconnect the logset LED wire harness from unit. (FIGURE 5)

6. Examine the bulbs to determine which bulbs require replacement.

7. Unscrew bulbs counter clockwise.

8. Insert new bulbs.

9. Re-connect the logset LED wire harness to the unit.

10. Replace the log by inserting the rear tab of the logset under the back ledge of the

fireplace and push down on the front edge of the logset until it snaps into place.

(FIGURE 4)

11. Replace log grate using two screws previously removed.

FIGURE 5

LED wire harness