Dimplex BF33STP Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dimplex BF33STP. Dimplex BF33STP 14 pagina's. Fireplace
Ook voor Dimplex BF33STP: Praktische gebruikershandleiding (15 pagina's), Gebruikershandleiding (14 pagina's), Servicehandleiding (20 pagina's), Gebruikershandleiding (14 pagina's), Handleiding voor probleemoplossing (2 pagina's), Installatiehandleiding (14 pagina's)

Pagina afdrukken

Maintenance

Figure 3

Back

Ledge

Rear

Side Section

Tab

Figure 4

leases from the ledge located

at the bottom of the partially

reflective glass (Figure 3).

NOTE: Log set fits tightly into

firebox, some force may be nec-

essary to remove.

4. Set logset in front of firebox.

5. Disconnect the logset LED

wire harness from unit

(Figure 4).

6. Examine the bulbs to de-

termine which bulbs require

Log

Ember

bed

Front

Edge

LED Wire

Harness

replacement.

7. Unscrew bulbs counter clock-

wise.

8. Insert new bulbs.

9. Re-connect the logset LED

wire harness to the unit.

10. Replace the log by inserting

the rear tab of the logset un-

der the back ledge of the fire-

place and push down on the

front edge of the logset until it

snaps into place (Figure 3).

11. Replace log grate using two

screws previously removed.

Purifire™ Filter

The Purifire™ filter supplied in

your fireplace is reusable and

washable. The filter should be

cleaned or replaced on average

once a year, or if overheat indica-

tor lamp is activated. To clean

the filter gently tap filter on a hard

surface to dislodge any loose dirt

or debris, and then clean with

water. Do not use soap or clean-

ing products, as they may dam-

age the filter. The filter size is 20"

X 10" X 1" rated at MERV 10. If

using an after market filter follow

the manufacturers recommended

replacement instructions.

To replace filter: