Toshiba 24J2KCV Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Toshiba 24J2KCV. Toshiba 24J2KCV 12 pagina's.

Pagina afdrukken

ECO OPERATION

To automatically control room temperature to save energy (except in DRY and

FAN ONLY mode)

Press

: Start and stop the operation.

Note: Cooling operation; the set temperature will increase automatically

1 degree/hour for 2 hours (maximum 2 degrees increase).

For heating operation the set temperature will decrease.

TIMER OPERATION

Set the timer when the air conditioner is operating.

Setting the ON Timer

Press

: Set the desired

ON timer.

Press

: Set the timer.

Press

: Cancel the timer.

Daily timer allows the user to set both the ON & OFF timers and will be

activated on a daily basis.

Setting Daily Timer

Press

: Set the ON timer.

Press

: Set the OFF timer.

●

During the daily timer is activating, both arrows ( , ) are indicated.

Note:

●

Keep the remote control in accessible transmission to the indoor unit;

otherwise, the time lag of up to 15 minutes will occur.

●

The setting will be saved for the next same operation.

DISPLAY LAMP BRIGHTNESS ADJUSTMENT

To decrease the display lamp brightness or turn it off.

1. Press and hold

for 3 seconds until brightness level (

) is shown on remote control LCD then release the button.

2. Press

Rise

Decrease

Remote control

Operation display

LCD

Lamp illuminates full brightness.

Lamp illuminates 50% brightness.

Lamp illuminates 50% brightness and the operation lamp

is turned off.

All lamps are turned off.

●

In the examples of

and

, the lamp illuminates for 5 seconds before

going off.

TEMPORARY OPERATION

In case of the misplaced or discharged remote control

Pressing the RESET button, the unit can start or

●

stop without using the remote control.

●

Operation mode is set on AUTOMATIC operation,

preset temperature is 24°C and fan operation is

automatic speed.

Setting the OFF Timer

Press

: Set the desired

OFF timer.

Press

: Set the timer.

Press

: Cancel the timer.

Press

button during

the ( or ) mark flashing.

to adjust brightness in 4 levels.

Brightness

100%

50%

All turned off

PRESET OPERATION

Set your preferred operation for future use. The setting will be memorized by

the unit for future operation (except airflow direction).

1. Select your preferred operation.

2. Press and hold

for 3 seconds to memorize the setting.

The

mark displays.

3. Press

: Operate the preset operation.

AUTO RESTART FUNCTION SETTING

This product is designed so that, after a power failure, it can restart

automatically in the same operating mode as before the power failure.

Information

The product is shipped with Auto Restart function in the OFF position.

Turn it ON as required.

How to turn ON the Auto Restart Function

Press and hold the [OPERATION] button on the indoor unit for 3 seconds

●

(3 beep sounds and OPERATION lamp blink 5 time/sec for 5 seconds).

How to turn OFF the Auto Restart Function

Press and hold the [OPERATION] button on the indoor unit for 3 seconds

●

(3 beep sounds but OPERATION lamp does not blink).

Note:

In case of ON timer or OFF timer are set, AUTO RESTART OPERATION

●

does not activate.

COMFORT SLEEP OPERATION

For comfortable sleep, automatically control air flow and automatically turn OFF.

Press

: Select 1, 3, 5 or 9 hrs for OFF timer operation.

Note: The cooling operation, the set temperature will increase automatically

1 degree/hour for 2 hours (maximum 2 degrees increase).

SELF CLEANING OPERATION

(COOL AND DRY OPERATION ONLY)

To protect bad smell caused by the humidity in the indoor unit.

1. If the

button is pressed once during "Cool" or "Dry" mode,

the fan will continue to run for other 30 minutes, then it will turn off

automatically. This will reduce the moisture in the indoor unit.

2. To stop the unit immediately, press the

30 seconds.

MAINTENANCE

Firstly, turn off the circuit breaker.

Indoor Unit and Remote Control

Clean the indoor unit and the remote control with a wet cloth when needed.

●

No benzine, thinner, polishing powder or chemically-treated duster.

●

Air filters

Clean every 2 weeks.

1. Open the air inlet grille.

2. Remove the air filters.

3. Vacuum or wash and then dry them.

4. Reinstall the air filters and close the air inlet grille.

OPERATION AND PERFORMANCE

1. Three-minute protection feature: To prevent the unit from being activated

for 3 minutes when suddenly restarted or switched to ON.

2. Some minor cracking sound may occur when unit operating. This is

normal because the cracking sound may be caused by expansion/

contraction of plastic.

Air conditioner operating conditions

Temp.

Outdoor Temperature

Operation

Cooling

-10°C ~ 46°C

Dry

-10°C ~ 46°C

more 2 times within

Room Temperature

21°C ~ 32°C

17°C ~ 32°C