Installing EasyMP Monitor
• If your operating system is Windows Vista or Windows 7
Place the copy of the EMP Monitor.dat file in "C:\Users\(User
Name)\AppData\Local\VirtualStore\Program Files\EPSON
Projector\EasyMP Monitor Ver.x.xx".
q
The software name has been changed.
Before: EMP Monitor _ After: EasyMP Monitor
If you are already using EMP Monitor, you can replace with this software.
Installing
You must have administrator authority in order to install EasyMP
Monitor.
To download the software and manual, visit
your location.
Double-click the downloaded software file to start the install program.
Follow the on-screen instructions.
If EasyMP or EMP Monitor is already installed, uninstall it before
installing this software. s "Uninstalling EasyMP Monitor"
Limitations imposed by a Windows Vista or Windows
7 environment
When using EasyMP Monitor under Windows Vista or Windows 7, note
the following limitations.
• You must have administrator authority in order to use Register at
startup on the Environment setup screen of EasyMP
Monitor.s "Monitoring using the system tray"
www.epson.com
and select
p.46
p.26
• If EasyMP Monitor is installed on your computer, uninstall it before
you update the operating system to Windows Vista or Windows 7.
Updating your OS without uninstalling the software may cause a
malfunction. s "Uninstalling EasyMP Monitor"
Before starting operations
Check the following points before starting up EasyMP Monitor.
• EasyMP Monitor must be installed on the computer to be used for
monitoring and control.
• The computer and the projectors must be connected to the network.
• Depending on the projector model, a commercially-available serial W
TCP/IP conversion adapter and a connection cable are required in
order to use EasyMP Monitor. See your projector's User's Guide.
Make the settings for the serial W TCP/IP conversion adapter before
connecting to the projector.
q
To enable projectors to be monitored and controlled even when they are in
*
standby mode
, make the following settings at the projectors. The settings
that need to be made will vary depending on the projector you are using.
See your User's Guide for more information.
• Set Standby Mode to Communication On (or Network On).
• Set Network Monitoring to On.
* When the projector's
p.46
indicator is lit orange.
8
Pagina afdrukken