Dimplex BFSL33 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dimplex BFSL33. Dimplex BFSL33 13 pagina's. Fireplace
Ook voor Dimplex BFSL33: Gebruikershandleiding (14 pagina's), Servicehandleiding (19 pagina's), Installatiehandleiding (19 pagina's)
Pagina afdrukken
Operation
B. "-- " Button
Pressing this button toggles se-
quentially through the three levels
of the fireplace: flame only; to
flame and low heat; to flame and
high heat.
!
NOTE: After the unit is
switched from flame and high
heat to another function there
is a 30 second fan delay,
where the fan will continue
running before turning off.
C. "O" Button
Pressing this button at any time
will shut the unit off.
D. 3-Position Switch
Switches the operation of the
fireplace between the different
modes of the fireplace:
• OFF (center): Makes the unit
inoperable.
• MANUAL (top): All functions
of the fireplace are controlled
by the On and Off buttons as
described above (B, C).
• REMOTE (bottom): All func-
tions of the fireplace are con-
trolled by the Remote Control.
E. LED Indicators
Depicts which of the three levels
the fireplace is currently operating
at: Level 1 , Level 2
3
.
F. Voltage Selector Switch
Needs to be set to reflect the in-
coming voltage to the unit - 115V
or 230V.
!
NOTE: The heater may emit
a slight, harmless odor when first
used. This odor is a normal con-
dition caused by initial heating of
internal heater parts and will not
occur again.
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
fireplace off and it will not come
back on without being reset. It
can be reset by switching the On/
Off Switch to Off and waiting ten
minutes before switching the unit
back on.
CAUTION: If you need to
continuously reset the heater,
disconnect power and call
Dimplex customer service at
1-888-DIMPLEX
(1-888-346-7539).
Remote Control
The fireplace is supplied with a
radio frequency remote control.
or Level
7