Epson PowerLite 1825 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson PowerLite 1825. Epson PowerLite 1825 14 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson PowerLite 1825: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Snelle installatie (2 pagina's), Bedieningshandleiding (47 pagina's), Conformiteitsverklaring (4 pagina's), Productspecificatie (2 pagina's), Onderdelenlijst (1 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (42 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

Epson PowerLite 1825 Gebruikershandleiding
PowerLite 1825

Adjusting the Image Shape

You can maintain a square or rectangular image by placing the
projector directly in front of the screen and keeping it level.
This also produces the best picture quality. If the projector is
tilted up or placed at an angle, you'll need to correct the image
shape by using one of the functions described below.
Automatic Image Adjustment
Use the projector's Quick Setup feature to set up quickly for a
presentation. This function automatically corrects the shape
and position of the image to fit on a screen with a 4:3 aspect
ratio. It can correct image distortion when the projector is
placed up to a 45° angle to the screen (vertically) and 20°
(horizontally).
1. Press the
Quick Setup
panel.
You see this message projected:
2. Aim the projector so the message appears near the middle of
the screen. Then use the zoom ring to enlarge the image so
the white frame (not shown above) extends beyond the
edges of the screen on all sides.
3. Press the
Quick Setup
momentarily onto the screen, and the adjustment is
complete. Your projected image now fits on the screen
(some slight overlap is normal).
The Quick Setup adjustment is retained when the projector is
turned off. If the projector is installed in a fixed location, you
won't need to repeat the adjustment each time you turn it on.
To fine-tune the Quick Setup adjustment, use Quick Corner
6
button on the projector's control
button again. Two white boxes flash
Using Quick Corner
Use Quick Corner to adjust the shape and size of the image
when it's uneven on all sides, or to finely adjust the image after
performing Quick Setup. If you just used Quick Setup, you can
use the projector's arrow buttons to make the Quick Corner
adjustment. If not, you'll have to select
follows:
1. Press the
Menu
projector's control panel.
2. Select the
Settings
3. Select
Keystone
4. Select
Quick Corner
You see this screen:
5. Use the
pointer button on the remote control (or the
arrow buttons on the projector) to select the corner you
want to adjust, and press
6. Use the
pointer button on the remote control (or the
arrow buttons on the projector) to adjust the shape.
7. Repeat steps 5 and 6 as needed to adjust any remaining
corners.
When done, press
Using Keystone Correction
The projector automatically corrects vertical keystone distortion
when it is tilted within a range of 45° up or down.
Projector tilted up
It takes about one second after projection starts for the image to
be corrected. During this time, a vertical keystone correction
gauge appears on the screen. If keystone correction isn't
.
®
automatically performed, you may need to turn on the
Auto V-Keystone
2/08
Quick Corner
button on the remote control or on the
menu and press
Enter
and press
.
Enter
and press
.
Enter
.
Enter
to exit the menu system.
Menu
Corrected image
Projector tilted down
setting in the projector's Settings menu.
as
.