Epson PowerLite 400W Bedieningshandleiding - Pagina 8

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Epson PowerLite 400W. Epson PowerLite 400W 36 pagina's. Warranty booklet
Ook voor Epson PowerLite 400W: Gebruikershandleiding (42 pagina's), Catalogus (10 pagina's), Productspecificaties (2 pagina's), Bedieningshandleiding (47 pagina's), Aanvullende handleiding (4 pagina's), Handleiding voor snelle installatie (6 pagina's), Gebruikershandleiding (1 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (22 pagina's), Handleiding bijwerken (4 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Conformiteitsverklaring (4 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

Epson PowerLite 400W Bedieningshandleiding

Registering and deleting projectors for monitoring

This operation is carried out when starting EMP Monitor for the first time after
it has been installed and when you would like to add projectors. Once a
projector has been registered, the status for the projector will be displayed
automatically each time EMP Monitor is started from that point onwards.

Starting EMP Monitor

PROCEDURE
1
Click [Start] - [Programs] (or [All Programs]) - [EPSON
Projector] - [EMP Monitor V4.22] in that order to start
EMP Monitor.
The main window will be displayed.
2
"Grouping view"
The operations to register projectors using the automatic search will
vary depending on where the projectors are connected to in the
network.
When registering a projector that is located in the same segment
that the computer the EMP Monitor is installed in is associated
with. s"Registering projectors using automatic search (Searching
for and registering projectors that are located in the same segment)"
p.8
When registering projectors that are in multiple segments of the
network s"Setting the range of addresses to do an automatic
search and registration"
p.10
7