Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Turn projector
on and off
Turn off projector
display and sound
Change
presentation
slides (USB
connection only)
Navigate
projector
menus
You can use the remote control to operate the projector. With the USB cable,
you can use the remote as a wireless mouse. For more information on using the
remote control, see your User's Guide.
Turn on your equipment
1
Turn on your computer or video source.
2
Make sure the power cord is connected and plugged into an electrical
outlet.
3
Press the
power button on the projector or remote control.
Power light
Power button
The
power light flashes green, then stays on.
NOTE: To shut down the projector, press the
4
If you don't see an image, press the Source Search button on the
remote control to select the image source.
NOTE: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
Choose which
source to display
Control projector volume
power button twice.
5
If you need to focus the image, first slide the switch to open the air filter
cover on the side of the projector. Then raise or lower the focus lever to
sharpen the image.
Project over the network
Install EasyMP
®
Network Projection on each computer that will project over
the network. Use the CD labeled Epson Projector Software for Meeting &
Monitoring to install EasyMP Network Projection. If you need to configure
the projector for your network, see "Network Configuration" on the back of
this sheet.
1
Press the LAN button on the remote control.
2
Start EasyMP Network Projection on your computer.
Windows
®
: Select
or Start > Programs or All Programs > EPSON
Projector > EasyMP Network Projection.
®
Mac OS
X: Double-click the EasyMP Network Projection icon in your
Applications folder.
3
Select Advanced Connection Mode and click OK.
4
Select the projector you want to connect to, then click Connect.
If you don't see the projector you want, click the Automatic search
button.
5
If you see a message asking for a keyword, enter the four digits that
appear on the LAN standby screen and click OK.
Your computer image is projected, with a floating toolbar:
When you're done presenting, click Disconnect on the toolbar.
NOTE: Using the optional Wireless LAN module, you can project
wirelessly. To purchase the Wireless LAN module or other accessories,
see "Optional Accessories" on the back of this sheet. For more
information about using the projector on a network, see the User's
Guide and EasyMP Network Projection Operation Guide on your
projector CD.
Air filter cover switch
Focus lever
Pagina afdrukken