Epson PowerLite 480 Handleiding voor snelle installatie - Pagina 3
Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Epson PowerLite 480. Epson PowerLite 480 4 pagina's. Maintenance
Ook voor Epson PowerLite 480: Handleiding voor snelle installatie (4 pagina's), Bedieningshandleiding (50 pagina's), Conformiteitsverklaring (4 pagina's), Specificaties (6 pagina's), Installatie Handboek (4 pagina's)
Pagina afdrukken
5
If you see a message asking for a keyword, enter the four digits that
appear on the LAN standby screen and click OK.
Your computer image is projected, with a floating toolbar:
When you're done presenting, click Disconnect on the toolbar.
Note: To project wirelessly, you need the optional Wireless LAN module.
To purchase the EPSON Wireless LAN module or other accessories,
see "Optional accessories" on the right. For more information about
using the projector on a network, see the User's Guide and EasyMP
Network Projection Operation Guide on your projector CD.
Network configuration
Install the EasyMP Network Projection software on each computer that will
project over the network. Use the CD labeled Epson Projector Software to
install the program.
For instructions on installing and using your network software, click the icon
on your desktop to access the on-screen EasyMP Network Projection Operation
Guide. If you don't see the EasyMP Network Projection Guide icon, you can
install it from the projector CD or go to the Epson website (see "Where to get
help").
To monitor and control your projector over the network, download and
install the EasyMP Monitor software (Windows only) and manual from
the Epson website. You can install a link to the downloads page from the
projector CD or go to the Epson website (see "Where to get help").
If you need to configure the projector for your network, you can use the
projector's menu system.
1
Press the Menu button on the remote control, select the Network
menu, then press Enter.
2
Choose Network Configuration and press Enter.
3
Select the Wired LAN menu and press Enter.
4
Choose IP Settings and press Enter. You see a screen like the following:
5
Do one of the following:
•
If your network assigns addresses automatically, turn on the DHCP
setting.
•
If your network does not assign addresses automatically, turn off DHCP
and enter the projector's IP Address, Subnet Mask, and Gateway
Address, as needed.
When you're finished entering an address in the network menu, highlight
Finish, then press the Enter button. Press the Esc button to return to the
previous menu.
6
When you're done making all necessary changes, press the Esc button,
select Complete and press the Enter button to save your settings. Then
press Enter again to confirm.
7
Press the Menu button to exit the menu system.
Using web remote
You can use a standard web browser to control the projector through the
network. A "virtual remote control" on your computer screen lets you perform
many of the same functions as you can with the physical remote control.
1
Open your web browser and enter the IP address of the projector you
want to monitor in the browser window.
If you're not sure what the address of the projector is, turn the projector
on and select Net. Info.-Wired LAN or Net. Info.-Wireless LAN from
the Network menu to display the IP address of the projector. (Do not
enter the leading zeroes.)
2
Press Enter, or, if you set a web control password in the projector's
Network menu, enter your user name and password, then press Enter.
3
From the Projector Control menu, select Web Remote. Use the on-screen
buttons to operate the projector, as you would using the remote control.
Select video signal
Select computer signal
Turn off picture
and sound
Select equipment connected
to the USB port
Select wired or wireless
network signal
Pause video
Display closed
captions