Epson PowerLite 765c Bedieningshandleiding - Pagina 11

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Epson PowerLite 765c. Epson PowerLite 765c 47 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson PowerLite 765c: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Onderdelen (26 pagina's), Onderdelenlijst (1 pagina's), Product ondersteunings bulletin (30 pagina's), Snelle installatie (2 pagina's), Installatiehandleiding (19 pagina's), Gebruikershandleiding (1 pagina's), Functiehandboek (5 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (42 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (38 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's), Snelle installatie (2 pagina's)

Registering and deleting projectors for monitoring

This operation is carried out when starting EasyMP Monitor for the first

time after it has been installed and when you would like to add

projectors. Once a projector has been registered, the status for the

projector will be displayed automatically each time EasyMP Monitor is

started from that point onwards.

The operations to register projectors vary as followings depending on

where the projectors are connected to in the network.

• When registering a projector that is located in the same segment as the

computer in which EasyMP Monitor is installed. s "Registering

projectors using automatic search (Searching for and registering

projectors that are located in the same segment)"

• When registering projectors that are in multiple segments of the

network. s "Setting the range of addresses to do an automatic search

and registration"

p.14

Procedure

Click "Start" - "Programs" (or "All Programs") - "EPSON

Projector" - "EasyMP Monitor Ver.4.40" in that order to start

EasyMP Monitor.

p.12

The main window will be displayed.

The red box area described in the screen below is referred to as

Grouping view.