Epson PowerLite 7800pNL Handleiding productinformatie - Pagina 17

Blader online of download pdf Handleiding productinformatie voor {categorie_naam} Epson PowerLite 7800pNL. Epson PowerLite 7800pNL 22 pagina's. Release of emp monitor for windows version 4.30
Ook voor Epson PowerLite 7800pNL: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Snelle installatie (2 pagina's), Vervangende onderdelen (1 pagina's), Bedieningshandleiding (47 pagina's), Installatiehandleiding (5 pagina's), Specificatieblad (2 pagina's), Product ondersteunings bulletin (25 pagina's)

Pagina afdrukken

Epson PowerLite 7800pNL Handleiding productinformatie

EPSON PowerLite 7800p Projector

Configuring the Monitoring Interval

If you need to have the most current status information about

your projectors, click the Refresh button in the EMP

Monitor screen.

You can also select how often EMP Monitor checks the

projector status:

1. From the Tool menu, select

screen.

Note: If you want EMP Monitor to run whenever you start

your computer, click

Add to Startup

2. Select the desired update interval and click

Using EMP NetworkManager

You can use EMP NetworkManager to configure the projector

to send out messages by e-mail, notifying you when a problem

occurs with the projector. Before running EMP

NetworkManager, make sure you've installed the software as

described in the User's Guide. Then follow the steps below to

create e-mail settings for each projector you want to monitor.

Selecting the Projectors to Monitor

1. To start EMP NetworkManager, click

Programs

All Programs > EPSON Projector >

EMP NetworkManager

You see the EMP NetworkManager screen. The projectors

you've registered through EMP Monitor appear as icons.

EPSON PowerLite 7800p Projector

. You see this

Configuration

Start >

2. If you'd like to register a projector manually and you know

its IP address, double-click the

icon.

selection

You see this screen:

3. Enter the projector's IP address and click

projector's icon is added to the EMP NetworkManager

screen.

Setting a Password

You can set a password to restrict access to each projector from

EMP NetworkManager:

1. Right-click the icon of the projector whose password you

want to set, then select

2. Enter a password up to 14 characters in length.

Creating the E-Mail Settings

1. If EMP NetworkManager is not already running, open it

from the Start menu. You see your registered projectors:

2. Double-click the icon for the projector whose e-mail

settings you want to create. Enter your password, if you

created one.

5/03

Proj(ector) address

. The

Add

Change Password