Epson PowerLite 82c Specificatieblad - Pagina 13

Blader online of download pdf Specificatieblad voor {categorie_naam} Epson PowerLite 82c. Epson PowerLite 82c 15 pagina's. Projector
Ook voor Epson PowerLite 82c: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (47 pagina's), Onderdelenlijst (1 pagina's), Handleiding voor snelle installatie (7 pagina's), Installatiehandleiding (19 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (8 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Conformiteitsverklaring (4 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's), Specificaties (2 pagina's), Specificaties (2 pagina's)

Pagina afdrukken

5. Hold the lamp as shown and pull it straight out.

Note:

The lamp(s) in this product contain mercury. Please

consult your state and local regulations regarding disposal or

recycling. Do not put in the trash.

6. Gently insert the new lamp. If it doesn't fit easily, make sure

it's facing the correct way.

Caution:

Do not touch the glass portion of the lamp assembly. Touching

the glass could result in premature lamp failure.

7. Once the lamp is fully inserted, tighten its screws.

Note:

Be sure to seat the lamp fully and secure the lamp cover. If the

lamp is not properly installed or the cover is loose, the lamp will

not turn on.

8. Lower the lamp cover into place. Then slide the cover closed

and tighten the screw.

9. Reset the lamp timer as described on page 13.

Epson PowerLite 62c/82c Projector

Resetting the Lamp Timer

You must reset the lamp timer after replacing the lamp to clear

the

Replace the Lamp

Note:

Do not reset the lamp timer if you have not replaced the lamp. If

you do, the Lamp Hours will not accurately reflect the number of

hours that the lamp has been used.

1. Connect the power cable and turn on the projector.

2. Press the

button on the remote control or projector

and select the

Reset

following:

3. Select the

Reset Lamp Hours

see the following:

4. Select

and press

Yes

5. Press

to return to the main menu or

Esc

menu system.

9/05

Epson PowerLite 62c/82c Projector

warning message. Follow these steps:

menu. Then press

. You see the

Enter

option and press

Enter

. You

Enter

to exit the