Epson PowerLite 8300i with EasyMP.net module Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson PowerLite 8300i with EasyMP.net module. Epson PowerLite 8300i with EasyMP.net module 42 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson PowerLite 8300i with EasyMP.net module: Bedieningshandleiding (36 pagina's), Bedieningshandleiding (47 pagina's), Snelle installatie (2 pagina's), Product ondersteunings bulletin (27 pagina's), Beknopte handleiding (20 pagina's), Onderdelenlijst (1 pagina's), Aanvullende handleiding (2 pagina's), Brochure & specificaties (2 pagina's), Gebruikershandleiding (1 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's), Snelle installatie (2 pagina's)

Registering and deleting projectors for monitoring

This operation is carried out when starting EMP Monitor for the first

time after it has been installed and when you would like to add

projectors. Once a projector has been registered, the status for the

projector will be displayed automatically each time EMP Monitor is

started from that point onwards.

Procedure

Click Start - Programs (or All Programs) - EPSON Projector -

EMP Monitor V4.30 in that order to start EMP Monitor.

The main window will be displayed.

The area described in red box is referred to as Grouping view.

The operations to register projectors using the automatic search will vary

depending on where the projectors are connected to in the network.

• When registering a projector that is located in the same segment as the

computer in which EMP Monitor is installed. s "Registering

projectors using automatic search (Searching for and registering

projectors that are located in the same segment)"

• When registering projectors that are in multiple segments of the

network. s "Setting the range of addresses to do an automatic search

and registration"

p.13

p.11