Philips 105S63 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Philips 105S63. Philips 105S63 46 pagina's. Crt monitor

INSTALLATION INSTRUCTIONS

To attach the swivel base to the monitor, do the following:

Carefully turn the monitor on its side or upside down. ( see figure 1 )

Locate the cavities at the bottom front of the monitor.

Insert the pegs on the swivel base into these cavities. Push the swivel base

forward until the swivel base locks in place.

To remove the swivel base, hold the bottom of the swivel base, then push

it out.

Figure 1

Power Source:

1. Make sure the power cord is the correct type that required in your area.

2. This monitor has a universal power supply that allows operation in either

100/120V AC or 220/240V AC voltage area ( No user adjustment is

required. )

3. Connect the power cord into your monitor's power input socket, and then

plug the other end into a 3-pin AC power outlet. The power cord may

be connected to either a wall power outlet or the power outlet socket on

your PC, depending on the type of power cord supplied with your

monitor.

Philips_manual_

Tuesday, November 18, 2003 3:00:45 PM

Install

Installing and Removing the Swivel Base

Remove