Philips 107E63 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Philips 107E63. Philips 107E63 46 pagina's.

INSTALLATION INSTRUCTIONS

To attach the swivel base to the monitor, do the following:

• Carefully turn the monitor on its side or upside down. ( see figure 1 )

• Locate the cavities at the bottom front of the monitor.

• Insert the pegs on the swivel base into these cavities. Push the swivel base

forward until the swivel base locks in place.

• To remove the swivel base, hold the bottom of the swivel base, then push

it out.

Figure 1

Power Source:

1. Make sure the power cord is the correct type that required in your area.

2. This monitor has a universal power supply that allows operation in either

100/120V AC or 220/240V AC voltage area ( No user adjustment is

required. )

3. Connect the power cord into your monitor's power input socket, and then

plug the other end into a 3-pin AC power outlet. The power cord may

be connected to either a wall power outlet or the power outlet socket on

your PC, depending on the type of power cord supplied with your

monitor.

Install

Installing and Removing the Swivel Base

Remove