Toshiba 14AF43 Servicehandleiding - Pagina 15
Blader online of download pdf Servicehandleiding voor {categorie_naam} Toshiba 14AF43. Toshiba 14AF43 38 pagina's. Toshiba tv user's manual
Ook voor Toshiba 14AF43: Gebruikershandleiding (36 pagina's)
Pagina afdrukken
2-11: CONTRAST MAX MANUAL
1.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (18) on the remote control to
select "CONT.MAX".
2.
Press the VOL. UP/DOWN button on the remote control
until the contrast step No. becomes "74".
3.
Receive a broadcast and check if the picture is normal.
4.
Press the TV/VIDEO button on the remote to set to the
AV mode.
5.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (18) on the remote control to
select "CONT.MAX".
6.
Press the VOL. UP/DOWN button on the remote control
until the contrast step No. becomes "86".
7.
Receive a broadcast and check if the picture is normal.
8.
Press the TV/VIDEO button on the remote to set to the
CS mode.
9.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (18) on the remote control to
select "CONT.MAX".
10.
Press the VOL. UP/DOWN button on the remote control
until the contrast step No. becomes "90".
11.
Receive a broadcast and check if the picture is normal.
2-12: SEPARATION 1, 2
Please do the method (1) or method (2) adjustment.
Method (1)
1.
Set the multi-sound signal generator for each different L-
ch and R-ch frequency (Ex. L-ch=2KHz, R-ch=400Hz) and
receive the RF.
2.
Connect the oscilloscope to the Audio Out Jack.
3.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (34) on the remote control to
select "SEP 1".
4.
Press the VOL. UP/DOWN button on the remote control to
adjust it until the audio output wave becomes a fine sine
wave.
5.
Press the CH UP button once the set to "SEP 2" mode.
Then perform the above adjustment 4.
Method (2)
1.
Set the multi-sound signal generator L-ch=1KHz, R-ch
=Non input and receive the RF.
2.
Connect the oscilloscope to the Audio Out Jack (R-ch).
3.
Press the AUDIO SELECT button on the remote control to
set to the stereo mode.
4.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (34) on the remote control to
select "SEP 1".
5.
Press the VOL. UP/DOWN button on the remote control to
adjust it until the R-ch output becomes minimum.
6.
Set the multi-sound signal generator L-ch=Non input,
R-ch=1KHz and receive the RF.
7.
Connect the oscilloscope to the Audio Out Jack (L-ch).
8.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (35) on the remote control to
select "SEP 2".
9.
Press the VOL. UP/DOWN button on the remote control to
adjust it until the L-ch output becomes minimum.
ELECTRICAL ADJUSTMENTS
D-3
2-13: LEVEL
1.
Receive the monoscope pattern (70dB).
2.
Connect the AC voltmeter to pin 6 of CP101.
3.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (33) on the remote control to
select "LEVEL".
4.
Press the VOL. UP/DOWN button on the remote control
until the AC voltmeter is 75 ± 2mV.
2-14: OSD HORIZONTAL
1.
Activate the adjustment mode display of Fig. 1-1.
2.
Press the VOL. UP/DOWN button on the remote
control until the difference of A and B becomes
minimum. (Refer to Fig. 2-3)
00 OSD
A
2-15: Confirmation of Fixed Value (step No.)
Please check if the fixed values of the each adjustment
items are set correctly referring below.
NO.
FUNCTION
02
H.VCO
04
AFC GAIN
05
V.SHIFT
06
H.SIZE
09
VS CORRECTION
15
BRIGHT MAX
17
BRIGHT MIN
19
CONTRAST CENT
20
CONTRAST MIN
21
COLOR MAX
23
COLOR MIN
25
SHARPNESS
26
CB DELAY FINE
27
CR DELAY FINE
28
CB PEDESTAL ADJ
29
CR PEDESTAL ADJ
30
E/W PARABOLA
31
E/W CORNER
32
E/W TRAPEZIUM
TV
24
B
Fig. 2-3
STEP NO.
03
04
00
00
42
125
50
50
18
90
00
40
00
00
08
08
31
31
31