Toshiba 20V300E Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Toshiba 20V300E. Toshiba 20V300E 28 pagina's. Lcd color tv
Pagina afdrukken
Programming channels into the TV's
channel memory
• First, use the Auto tuning function to preset all
the active channels in your area automatically.
Then, arrange the preset channels with the
Manual tuning function so that you can tune
into only desired channels.
• Use the Manual tuning operation if desired
channels cannot be preset with the Auto tuning
or if you would like to preset channels to
specifi c position numbers one by one.
Programming channels automatically
1
Press MENU, then press 1 or 2 to display
the SET UP menu.
2
Press t or s to select Auto tuning.
Language
Auto tuning
Manual tuning
Picture position
MENU
Back
3
Press OK to start the automatic search.
The search will begin for all available
stations.
Searching
Pos
:2
EXIT
Stop
The slide bar will move along the line as the
search progresses.
If you make a mistake, simply repeat steps
1-3 to start again from the beginning.
4
When the automatic search is completed,
the TV will automatically return to the fi rst
program position.
5
Press P s or P t to view the programmed
position.
Note:
When you preset the program channel which
sound of broadcast transmission system adopts
"M" system, the sound system may not be tuned
correctly if the radio waves transmit badly. At
that time, preset the channel by Manual tuning.
The countries such as Myanmar, Brazil, Chile,
Colombia apply to this case. See page 26 for
more details.
14
SET UP
English
OK
OK
OK
EXIT
Watch TV
Auto tuning
Getting started
Manually setting channels in the channel
memory
1
From the SET UP menu, press t or s to
select Manual tuning.
2
Press OK to display the Manual tuning
menu.
Press 1 or 2 to select an item, then press t
or s to adjust the item as shown below.
A. Program position selection
B. Sound system (
C. Color system (
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the color of a certain channel is
abnormal, the automatic color system
selection (A) may have malfunctioned, or
sound system selection is wrong. In such
a case, select another color and/or sound
system (
D. Program position skip selection
Press t or s to turn the program position
skip option on "
The program position will then be skipped
when you select channels with P s or P t.
E. Channel search operation
Press s to search up the band or t to
search down the band.
Press t or s repeatedly until your desired
channel is displayed.
When a station/satellite is found, it will be
displayed.
NEVER PRESS ANY OTHER BUTTONS
WHILE THE TV IS TUNING.
F. Auto Fine Tuning
Press t or s to turn the Auto Fine Tuning
option on " " or off "0".
The Auto Fine Tuning function automatically
corrects slight fl uctuations when receiving
signals.
Manual Fine Tuning
While the Auto Fine Tuning turn off "0",
press t or s so that the better picture and
sound are obtained.
Press OK to store your settings.
Program
01
A
B/G
OK
Store
MENU
EXIT
Back
Watch TV
A
C
E
B
D
F
page 26)
page 26)
page 26).
" or off "
".