MSI 612BF Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} MSI 612BF. MSI 612BF 48 pagina's. 3d-agp vga / 3d-audio m/b for socket 370
Ook voor MSI 612BF: Handmatig (45 pagina's)

Pagina afdrukken

You must read the documentation come with expansion card for any hardware or software

settings that may be required to setup your specific card.

Installation Procedure:

1. Read the documentation from your expansion card.

2. Set any necessary jumpers on your expansion card.

3. Remove your computer's cover.

4. Remove the bracket on the slot you intend to use.

5. Carefully align the card's connectors and press firmly.

6. Secure the card on the slot with the screw you remove in step 4.

7. Replace the computer's cover.

8. Setup the BIOS if necessary.

9. Install the necessary software drivers for your expansion card.

Assigning IRQs for Expansion Cards

Some expansion cards may require an IRQ to operate. Generally an IRQ must be exclusively

assigned to only one device. In an standard design there are 16 IRQs available but most of

them are occupied by the system and leaves 6 free for expansion cards.

With most recent device, the BIOS automatically assign an IRQ number to PCI expansion

cards. Please make sure there are no any of two devices use same IRQs, otherwise your

computer may experience some problems when those two devices are in use at the same time.

Assigning DMA Channels for Expansion Cards

Some devices may also need to use a DMA (Direct Memory Access) channel.

DMA

assignments for this motherboard are handled the same way as the IRQ assignment process

described above. You can select a DMA channel in the PCI and PnP configuration section of

the BIOS Setup utility.

2-9 External Connectors

Power Connector: AT Power Connector (12-pin block): P1