MSI 612BF Gebruikershandleiding - Pagina 34

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} MSI 612BF. MSI 612BF 48 pagina's. 3d-agp vga / 3d-audio m/b for socket 370
Ook voor MSI 612BF: Handmatig (45 pagina's)

Pagina afdrukken

The choice: Default (the CPU clock Depend on Jumper),66MHz/off , 66MHz/on , 75MHz/off

, 83MHz/off , 95MHz/off, 100MHz/off , 100MHz/on , 112MHz/on , 117MHz/on , 124MHz/off,

133MHz/off, 133MHz/on, 138/off, 140/on, 150/off.

 CPU Ratio:

This item allows you to select the CPU ratio.

From X3 to X8

3-9 Defaults Menu

Selecting "Defaults" from the main menu shows you two options which are described below

Load Optimal Defaults:



When you press <Enter> on this item you get a confirmation dialog box with a message

similar to:

Load Optimal Defaults (Y/N) ? N

Pressing 'Y' loads the Optimal default values for the most stable, optimal performance

system operations.



Load Standard Defaults:

When you press <Enter> on this item you get a confirmation dialog box with a message

similar to:

Load Standard Defaults (Y/N) ? N

Pressing 'Y' loads the Standard default values that are factory settings for normal

performance system operations.

3-10 Supervisor/User Password Setting

You can set either supervisor or user password, or both of then. The differences

between are:

supervisor password : can enter and change the options of the setup menus.

user password

ENTER PASSWORD:

Type the password, up to eight characters in length, and press <Enter>. The password typed

now will clear any previously entered password from CMOS memory. You will be asked to

confirm the password. Type the password again and press <Enter>. You may also press

<Esc> to abort the selection and not enter a password.

To disable a password, just press <Enter> when you are prompted to enter the password. A

message will confirm the password will be disabled. Once the password is disabled, the

system will boot and you can enter Setup freely.

PASSWORD DISABLED.

: just can only enter but do not have the right to change

the options of the setup menus. When you select this

function, the following message will appear at the

center of the screen to assist you in creating a

password.