Epson Stylus Pro 4800 Portrait Edition Snelle referentiehandleiding - Pagina 6

Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} Epson Stylus Pro 4800 Portrait Edition. Epson Stylus Pro 4800 Portrait Edition 12 pagina's. Stylus pro 800 series
Ook voor Epson Stylus Pro 4800 Portrait Edition: Installatiehandleiding (15 pagina's), Brochure & specificaties (8 pagina's), Aan de slag handleiding (10 pagina's), Handmatig (17 pagina's), Belangrijke informatie (2 pagina's), Beperkte garantie (12 pagina's), Brochure & specificaties (6 pagina's), Installatiehandleiding (4 pagina's), Brochure & specificaties (16 pagina's)

Pagina afdrukken
Epson Stylus Pro 4800 Portrait Edition Snelle referentiehandleiding
Checking Ink Levels and Replacing Ink Cartridges
Checking Ink Levels and Replacing Ink Cartridges
Before you begin a large print job, you should check
your ink levels. If one of your cartridges is low, you can
replace it before you start. Or you can wait until the ink
runs out, replace the cartridge, and then continue the job
without any loss of print quality.

Checking Ink Levels

The easiest way to check ink levels is from the
control panel.
3sec.
(full)
1 Matte Black/
Photo Black
2 Cyan
4 Yellow
3 Magenta

Replacing Ink Cartridges

When the ink light flashes, one of the indicators is low,
and INK LOW is displayed on the LCD panel, the
corresponding cartridge is nearly empty. Make sure you
have the correct replacement cartridge.
You can install any combination of 110 ml and 220 ml
cartridges.
Epson UltraChromeK3
Photo Black
Cyan
Magenta
Yellow
Light Cyan
Light Magenta
Light Black
Light Light Black
Matte Black
1 2 3 4 5 6 7 8
Menu
(empty)
8 Light Light Black
7 Light Magenta
6 Light Cyan
5 Light Black
ink
TM
110 ml
220 ml
T564100
T565100
T564200
T565200
T564300
T565300
T564400
T565400
T564500
T565500
T564600
T565600
T564700
T565700
T564900
T565900
T543800
T544800
When one of the indicators shows empty and INK OUT
is displayed on the LCD panel, the cartridge is empty. To
replace the cartridge, first make sure the printer is on.
1
Press the ink compartment cover to open it.
2
Raise the ink lever to the unlocked position.
3
Remove the empty ink cartridge from the printer.
Do not shake the empty cartridge, or ink
Warning:
may leak. If ink gets on your hands, wash them
thoroughly with soap and water. If ink gets in your
eyes, flush them immediately with water.
4
Make sure the replacement cartridge is the correct
color, and remove it from its package.
Gently shake the cartridge before installing it.
5
Continue