Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Netwerkhandleiding - Pagina 13

Blader online of download pdf Netwerkhandleiding voor {categorie_naam} Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 46 pagina's. Warranty statement
Ook voor Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Specificatieblad (6 pagina's), Aan de slag (13 pagina's), Brochure & specificaties (6 pagina's), Installatiehandleiding (16 pagina's), Snelle referentiehandleiding (12 pagina's), Installatiehandleiding (4 pagina's), Handleiding productinformatie (16 pagina's), Beperkte garantie (12 pagina's)

The following table lists the components required for configuring the network

interface with EpsonNet Config.

EpsonNet Config's setting screens

TCP/IP, IPP, SNMP (IP trap)

MS Network

The following table lists the components required for network printing.

Printing method

LPR or Internet printing

Microsoft

Network Shared printing

5. If the necessary components are not in the list, click Install to install them.

For LPR or Internet printing:

Internet Protocol (TCP/IP) is installed by default. You cannot add or delete it.

For Microsoft Network Shared printing:

Select Client, then click Add. Select Client for Microsoft Networks and then click OK.

6. For LPR, Internet, Microsoft Network Shared printing:

Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties

dialog box to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP

address, the subnet mask, etc. and then click OK.

7. Restart the computer.

The necessary components are now installed. Go to the section "Connecting the Network

Interface to the Network" on page 14.

Macintosh

To assign an IP address, subnet mask, etc. to your Macintosh, follow the steps below.

1. From the Apple menu, select System Preferences.

2. Open the Network control panel. Click the TCP/IP tab.

3. Select Built-in Ethernet from the Show pull down menu.

4. Assign an IP address and other settings if necessary.

5. Click the Apply Now button to save any changes.

Go to the section "Connecting the Network Interface to the Network" on page 14.

Necessary components

Internet Protocol (TCP/IP)

Necessary components

Internet Protocol (TCP/IP)

TCP/IP or NetBEUI

Client for Microsoft Networks

Setting Up Your System for Network Printing