Toshiba E-Studio 6506AC Handleiding voor papiervoorbereiding - Pagina 13
Blader online of download pdf Handleiding voor papiervoorbereiding voor {categorie_naam} Toshiba E-Studio 6506AC. Toshiba E-Studio 6506AC 46 pagina's.
1.LOADING PAPER
6
Move the end guide to the trailing edge of the paper while pushing its lower part in the direction
of the arrows.
Check that there is no gap between the paper and the side guides, as well as the paper and the
7
end guide.
If the gap is too wide, it could cause paper misfeeding, or the paper size could not be correctly detected.
B
Between the paper and side guides ("A" in the figure):
Make sure there is no gap. (0.5 mm (0.02") or less on one side, 1.0 mm (0.04") or less in total) However, if paper
misfeeding occurs, make a gap.
Between the paper and end guide ("B" in the figure):
Make sure there is no gap. (0.5 mm (0.02") or less)
Change the paper size indicator if required.
8
9
Push the drawer straight into this equipment carefully until it comes to a stop.
The paper size is automatically detected.
A
Loading Paper in Drawers 13