Philips P Line 65BDL3017P Gebruikershandleiding - Pagina 27

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Philips P Line 65BDL3017P. Philips P Line 65BDL3017P 41 pagina's.

Pagina afdrukken
65BDL3017P
H position
Moves the horizontal position of the
image left or right.
V position
Moves the vertical position of the
image up or down.
Auto adjust
Press "Set" to detect and adjust H position, V position,
Clock, Phase automatically.
Note: VGA input only.
Screen reset
Reset all settings in the Screen menu to factory preset
values.

5.2.3. Audio

Balance
Picture
Treble
Bass
Screen
Volume
Audio Out Volume
Audio
Volume Maximum
Volume Minimum
Con guration 1
Mute
Speaker
Con guration 2
Sync.Volume
Audio source
Option
Audio Reset
Balance
Adjust to emphasize left or right audio output balance.
Treble
Adjust to increase or decrease higher-pitched sounds.
Bass
Adjust to increase or decrease lower-pitched sounds.
Volume
Adjust the volume.
Audio Out Volume
Adjust to increase or decrease the line out audio output
level.
Minimum volume ≤ Volume ≤ Maximum volume
Note: This function will be disabled when Audio Out Sync is
ON.
Volume Maximum
Adjust your own limitation for the maximum volume setting.
Volume Minimum
Adjust your own limitation for the minimum volume setting.
Mute
Turn the mute function on/off.
Speaker
Turn the internal speaker on/off.
Note: This function is only availavle when "Audio Out Sync"
Sync. Volume
Enable/disable audio out (line out) volume adjustability to
sync with internal speakers volume, but PD Internal speaker
sound will be forced to be mute.
Audio source
Select the audio input source.
Analog: audio from audio input.
Digital : audio from HDMI/DVI audio.
Displyport: audio from DP
Audio Reset
Reset all settings in the Audio menu to factory preset
values.

5.2.4. Configuration1 menu

0
50
50
30
30
100
0
O
On
O
Digital
Switch on State
Select the display status when you connect the power cord
next time.
•
•
•
Panel saving
Choose to enable the panel saving functions and thus
reduce the risk of "image persistence" or "ghost-imaging".
•
•
RS232 routing
Select the network control port.
Choose from: {RS232} / {LAN ->RS232}.
Boot on source
Select the source when booting up.
16
is on.
Switch on state
Picture
Panel Saving
RS232 routing
Screen
Boot On Source
WOL
Audio
Light Sensor
Human Sensor
Con guration 1
Power LED Light
Network Settings
Con guration 2
Con guration1 Reset
Factory Reset
Option
{Power off} - The display will remain off when the power
cord is connected to a wall outlet.
{Forced on} - The display will turn on when the power
cord is connected to a wall outlet.
{Last status} - The display will return to the previous
power status (on/off/standby) when removing and
replacing the power cord.
{Brightness} - Select {On} and the image brightness
will be reduced to an appropriate level. The Brightness
setting in the Picture menu will be unavailable when
selected.
{Pixel shift} - Select the time interval ({Auto} / {10 ~
900} Seconds / {Off}) for the display to slightly expand
the image size and shift the position of pixels in four
directions (up, down, left, or right).
Last status
RS232
Last Input
O
O
O
On