Philips X Line 49BDL2005X/75 Gebruikershandleiding - Pagina 20

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Philips X Line 49BDL2005X/75. Philips X Line 49BDL2005X/75 49 pagina's.

2.3.2. ID Remote Control

Set the remote control ID if you intend to use this remote

control on several different displays.

Press [ID] button. The red LED blinks twice.

1. Press [ID SET] button for more than 1 second to enter the

ID Mode. The red LED lights up.

Press the [ID SET] button again to exit from ID mode. The

red LED lights off.

Press the digit numbers [0] ~ [9] to select the display you

want to control.

For example: press [0] and [1] for display No.1, press [1] and [1]

for display No.11.

The numbers available are from [01] ~ [255].

2. Not pressing any button within 10 seconds will exit the

ID Mode.

3. If a wrong button is pressed, wait 1 second after the red

LED lights off and then lights up again, then press the

correct digits again.

4. Press [ENTER] button to confirm. The red LED blinks

twice and then lights off.

NOTE:

•

Press [NORMAL] button. The green LED blinks twice,

indicating the display is in normal operation.

•

It is necessary to set up the ID number for each display

before selecting its ID number.

•

Use " " (pause) key on the remote control to freeze

the screen. Use " " (play) key on the remote control to

unfreeze the screen.

•

The "freeze" feature only can be adopted on "real"

video sources like VGA, AV, YPbPr, HDMI, DVI, DP.

•

Any operation on the remote control or video mode

change will unfreeze the screen.

49BDL2005X