Epson Stylus RIP Gebruikershandleiding - Pagina 15
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson Stylus RIP. Epson Stylus RIP 43 pagina's. Epson stylus color 3000: user guide
Ook voor Epson Stylus RIP: Handleiding voor snelle installatie (4 pagina's)
Pagina afdrukken
Installing the StylusRIP Software
Checking the Printer
Before you install the StylusRIP software, follow the
instructions in your printer's documentation to set up your
printer for use, making sure you perform the following steps:
If you'll be using the printer in a "typical" network
configuration (described on page 5 of the Introduction),
install an optional network interface card
Load paper, install ink cartridges, and make sure you allow
your printer to complete its entire ink charging cycle
Run a printer self test to make sure it operates properly
Connect the printer to the Macintosh or to the network
Install any software that came with the printer, including
the printer driver, utilities, and fonts
Send a sample print job to make sure the interface
connection is secure and the software is installed correctly
Once the printer is set up and tested fully, you're ready to
install the StylusRIP software on your system.
Caution:
Don't install the StylusRIP software until you've completely set up
and tested your EPSON Stylus printer or the software may not work
correctly.
Installing StylusRIP Standalone or
Print Server Software
Follow the steps in these sections to install the software on a
standalone Macintosh or on the print server system in a
network.
1-2