Epson Stylus RIP Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson Stylus RIP. Epson Stylus RIP 43 pagina's. Epson stylus color 3000: user guide
Ook voor Epson Stylus RIP: Handleiding voor snelle installatie (4 pagina's)

Pagina afdrukken

Introduction

Standalone and Network

Environments

If your Macintosh is not connected to a network, you are using

it as a "standalone" system, with your EPSON Stylus printer

directly connected to your system. Before you install the

StylusRIP software, you must set up your printer and test it

fully; see Chapter 1 for complete instructions.

If your Macintosh is connected in a network, there are two ways

to use the StylusRIP software, depending on how your network

is configured.

Note:

It is best to choose a Power Macintosh with a fast processor and

ample RAM as your print server, allowing you to devote its

resources to printing the data sent over the network. LocalTalk

networks are not recommended for use with EPSON printers.

In a "direct connection" configuration (as shown below), the

Macintosh that is connected to the printer acts as the print server,

with the StylusRIP Server software installed on it. The other

computers in the network are "clients" of the server, with the

StylusRIP client software installed on them.

serial cable

print server

clients

printer