Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C. Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C 31 pagina's. 3 cd changer with dolby® pro logic processor, five loudspeakers, 320 watts total power
Ook voor Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C: Specificaties (2 pagina's), Handmatig (31 pagina's)

Pagina afdrukken

DOLBY PRO LOGIC

Dolby Pro Logic

This state of the art Dolby Pro Logic mini

system enables you to experience and

enjoy a Home Cinema sound ambience. The

Pro Logic system allows more accurate

definition of the individual sound sources.

It produces greater sound separation

between channels and provides pinpoint

sound localization. Pro Logic provides four

sound outputs: Left, Center, Right and

Surround (Rear). Front sounds are produced

from the pair of Left and Right speakers

and a Center speaker. The surround sound

is reproduced by two speakers placed at

the rear of the listening area. Although the

surround sound is monaural (single-source),

a pair of speakers is necessary to produce

the correct diffused sound.

This Pro Logic decoder enables you to

decode the following modes: Dolby

Surround, Center Phantom, Dolby 3

Stereo or normal Stereo .

Setting up the Dolby Pro Logic

system

You must set up the system properly in

order to enjoy the Home Cinema sound to

the fullest. First, connect the speakers.

5-Speaker Connection

• Front speakers: Connect the front

speakers.

• Center speaker: Connect the center

speaker.

pg 01-31/P88/22-Eng

• Rear (surround) speakers: Connect

either the wired rear surround speakers

or a pair of wireless rear speakers (not

supplied) to the SURROUND OUT

terminals.

CENTER

REAR

SURROUND

FRONT

REAR

FRONT

LEFT

REAR

FRONT

RIGHT

Positioning the Speakers

To get the best surround sound effect,

place the speakers as follows.

CENTER

SPEAKER

SUB-

MINI HIFI

FRONT

WOOFER

SYSTEM

FRONT

LEFT

RIGHT

SURROUND

LEFT

RIGHT

Front Left and Right Speakers

For the best sound, place the Left and Right

speakers at an angle of approximately 45

degrees to the listener. If the speakers'

magnetic field affects the television

picture, increase the distance between the

TV and the speakers.

Center Speaker

For the best sound, place the center

speaker at the same height as the left and

right speakers. Place the center speaker

directly above or beneath the television.

Rear (surround) Speakers

The surround speakers should be placed at

normal listening ear level or mounted on

the wall at the back of the room. Most

important, experiment when placing the

surround speakers in order to obtain the

best sound.

Test Tone

This feature enables you to adjust the Front

Left, Front Right, Center and Surround

Sound levels of the respective speakers in

Dolby Pro Logic mode.

You must sit at the ideal sitting

position and use the remote control to

perform this operation.

1 Press CD, TUNER, TAPE or AUX to

switch on the system.

2 Press TEST TONE.

™ A test signal is generated; it will

move through the Left, Center, Right,

and Surround speakers, in that order.

™ "TEST TONE" followed by

"ADAPT BALANCE, CENTER

AND REAR LEVEL" will be

displayed.

™ The test signal will last for about 90

seconds.

3/6/00, 1:26 PM

3 Press

DPL TEST TONE

BALANCE

BALANCE L

to adjust the

CENTER

REAR

sound of the

front left

speaker.

™ The display will show

"BAL L +XX".

4 Press BALANCE R to adjust the sound

of the front right speaker.

™ The display will show

"BAL R +XX".

5 Press CENTER + or - to adjust the

sound of the center speaker.

™ The display will show either

"CENT +XX or -XX".

6 Press REAR + or - to adjust the

sound of the surround speakers.

™ The display will show either

"REAR +XX or -XX".

7 Adjust the sound of all

REPEAT

the speakers until they

are equal. When you

DPL

TEST TONE

are satisfied with the

CENTER

setting, press TEST

TONE again to switch

off the test signal.

Note:

– It is advisable to set the speakers' level

at normal listening level. " XX " denotes

the sound level.

3139 116 19721