Epson Stylus Scan 2000 Handmatig - Pagina 26

Blader online of download pdf Handmatig voor {categorie_naam} Epson Stylus Scan 2000. Epson Stylus Scan 2000 35 pagina's. Scanning application force quits on mac os 10.4 release of twain pro driver 2.10a;
Ook voor Epson Stylus Scan 2000: Gebruikershandleiding (7 pagina's), Productinformatieblad (4 pagina's), Snel aan de slag (4 pagina's), Handleiding productinformatie (13 pagina's), Productinformatieblad (4 pagina's), Product ondersteunings bulletin (12 pagina's), Specificatie (2 pagina's), Handmatig (11 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (14 pagina's), Gebruikershandleiding (24 pagina's), Online handleiding (10 pagina's)

Open the black ink cartridge package that came with your Stylus Scan. Remove

only the yellow tape seal from the ink cartridge.

10. Hold the black ink cartridge with its label facing up. Set the cartridge gently into

the holder. Do not press down on it.

11. Press the cartridge clamp down until it locks into place.

Caution:

Be sure to remove the yellow tape seal from the cartridge before

installing it; otherwise the cartridge may become unusable.

Do not remove the blue portion of the tape seal from the cartridge;

otherwise the cartridge may become clogged and unable to print.

Do not remove the tape seal from the bottom of the cartridge;

otherwise, ink will leak.

Caution:

Once you install the ink cartridges, do not open their clamps again

until you replace the ink cartridges. Otherwise, the cartridges may

become unusable.

Setting Up Your Stylus Scan 2000