Philips 7000 series Gebruikershandleiding - Pagina 6

Pagina afdrukken

Philips 7000 series Gebruikershandleiding

3 Get started

Charge the battery

Note

 Before you use your headphone for the rst

time, place charge the battery for 2 hours for

optimum battery capacity and lifetime.

 Use only the original USB-C charging cable to

avoid any damage.

 Finish your call before charging the

headphone, as connecting the headphone for

charging will power the headphone o .

Connect the supplied USB-C charging

cable to:

•

The USB-C charging slot on the

headphones and;

•

The charger/USB port of a

computer.

LED turns white during charging and

turns o when the headphones in

fully charged.

Tip

 Normally, a full charge takes 2 hours.

Pair the headphones

with your mobile phone

Before you use the headphones with

your mobile phone for the rst time, pair

it with a mobile phone. A successful

pairing establishes a unique encrypted

link between the headphones and

mobile phone. The headphones store

the last 4 devices in the memory. If you

try to pair more than 4 devices, the

earliest paired device is replaced by the

new one.

Make sure that the headphones are

fully charged and turned o .

Press and hold

until the white and blue LED ash

alternately.

The headphones remain in

pairing mode for 2 minutes.

Make sure that the mobile phone is

turned on and its Bluetooth feature

is activated.

Pair the headphones with the

mobile phone. For detailed infor-

mation, refer to the user manual of

your mobile phone.

The following example shows you how

to pair the headphones with your mobile

phone.

Activate the Bluetooth feature of your

mobile phone, select Philips TAN7506

Enter the headphone password

"0000" (4 zeros) if prompted. For

those mobile phones featuring

Bluetooth 3.0 or higher, no need to

enter a password.

Philips TAN7506

for 5 seconds