MSI 3BA0 Handmatig - Pagina 22

Blader online of download pdf Handmatig voor {categorie_naam} MSI 3BA0. MSI 3BA0 25 pagina's.
Ook voor MSI 3BA0: Gebruiksaanwijzing (33 pagina's)

Safety Instructions

∙ Read the safety instructions carefully and thoroughly.

∙ All cautions and warnings on the device or user's manual should be noted.

∙ Refer servicing to qualified personnel only.

∙ Keep the User's Guide that comes with the package for future reference.

∙ To prevent fire or shock hazard, keep this device away from humidity and high

temperature.

∙ Lay this device on a reliable flat surface before setting it up.

∙ Make sure that the power voltage is within its safety range and has been adjusted

properly to the value of 100~240V before connecting the device to the power outlet.

Do not disable the protective earth pin from the plug. The device must be connected

to an earthed mains socket-outlet.

∙ Always disconnect the power cord or switch the wall socket off if the device would be

left unused for a certain time to achieve zero energy consumption.

∙ The ventilator on the device is used for air convection and to prevent the device from

overheating. Do not cover the ventilator.

∙ Do not leave the device in an unconditioned environment with a storage temperature

above 60℃ or below -20℃, which may damage the device.

∙ NOTE: The maximum operating temperature is around 40℃.

∙ When cleaning the device, be sure to remove the power plug. Use a piece of soft

cloth rather than industrial chemical to clean the device. Never pour any liquid into

the opening; that could damage the device or cause electric shock.

∙ Place the power cord in a way that people are unlikely to step on it. Do not place

anything on the power cord.

∙ Always keep strong magnetic or electrical objects away from the device.

∙ If any of the following situations arises, get the device checked by service personnel:

• The power cord or plug is damaged.

• Liquid has penetrated into the device.

• The device has been exposed to moisture.

• The device does not work well or you can not get it work according to user's

manual.

• The device has dropped and damaged.

• The device has obvious sign of breakage.

∙ To prevent the monitor from tipping over, secure the monitor to a desk, wall or fixed

object with a anti-tip fastener that helps to properly support the monitor and keep it

safe in place.

⚠

Important

Please confirm the power distribution system in the installation site shall provide the

circuit breaker rated 120/240V, 20A (maximum).

Safety Instructions