Epson StylusRIP Professional (Stylus Photo 2200 Start hier Handleiding - Pagina 4

Blader online of download pdf Start hier Handleiding voor {categorie_naam} Epson StylusRIP Professional (Stylus Photo 2200. Epson StylusRIP Professional (Stylus Photo 2200 6 pagina's. Product support bulletin(s)
Ook voor Epson StylusRIP Professional (Stylus Photo 2200: Specificaties (2 pagina's), Product ondersteunings bulletin (10 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Product ondersteunings bulletin (4 pagina's)

Install Ink Cartridges

Open the output tray, the printer

cover, and the cartridge cover.

Shake each unopened cartridge up and down 4 or 5 times. Then remove them from

their packages. (Don't shake them after removing the packaging.)

Shake cartridge

in its package

Slide each cartridge into its slot with the green circuit board facing the back. Then

press each one down until it clicks into place.

Photo Black, Light Black, Cyan, Light Cyan,

Magenta, Light Magenta, Yellow

Close the cartridge cover and printer cover.

Press the

ink button.

The green

power and red

lights flash as your printer charges ink

for about 1

minutes.

CAUTION: Don't turn off the printer or interrupt charging, or you'll waste ink. If

the

power and

making any noise, you can turn it off.

Slide the left edge guide to the

width of your paper as marked on

the paper support.

Fan your paper and place it in the

printer against the right side of the

sheet feeder.

Slide the left edge guide to fit

lightly against the paper. Make sure

the paper lies beneath the arrow

inside the left edge guide.

Pull out the output tray extensions.

ink

ink lights don't turn off after 5 minutes, and the printer isn't

Cartridge cover

Don't touch the

green circuit board

Cartridge cover

Ink button