Philips AZ102N Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Philips AZ102N. Philips AZ102N 15 pagina's. Cd soundmachine
Ook voor Philips AZ102N: Specificaties (2 pagina's), Gebruikershandleiding (14 pagina's), Gebruikershandleiding (2 pagina's), Gebruikershandleiding (2 pagina's), Gebruikershandleiding (2 pagina's), Gebruikershandleiding (18 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (1 pagina's), Servicehandleiding (11 pagina's)

Pagina afdrukken

CD Player

Selecting a different track

• Press ∞/ § once or repeatedly until the

desired track number appears in the display.

• In the pause/stop position, press 2; to start

playback.

Finding a passage within a

track

1 During playback, press and hold ∞ or § .

➜ The CD is played at high speed and with

reduced volume.

2 When you recognize the passage you want,

release ∞ or § to resume normal playback.

Helpful hints:

–

When your searching reaches the end of the

last track, the CD goes to stop mode.

Programming track

numbers

You may store up to 20 tracks in the desired

sequence. If you like, store any track more

than once.

1 In the stop position, press PROG to

activate programming.

➜ Display: PROG and 00 flash. (See 5)

2 Press ∞ or § to select your desired track

number.

3 Press PROG to store the desired track

number.

➜ Display: PROG and 00 flash for you to

program the next track..

4 Repeat steps 2 to 3 to select and store all

desired tracks in this way.

➜ If you attempt to store more than 20

tracks, no track can be selected and the

display shows - - - - .

5 To play your program, press 2/;.

Helpful hints :

–

When playback of your program comes

to the stop position, your set will return

to normal playback.To re-enter program

mode, press PROG in the stop position.

Reviewing the program

In the stop position, press PROG repeatedly

to see your stored tracks.

Erasing a program

You can erase the contents of the memory

by:

– in the stop position, press PROG to enter

program mode, and then press 9.

– selecting FM, MW or OFF;

– opening the CD door;