Toshiba CO60PM Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Toshiba CO60PM. Toshiba CO60PM 28 pagina's. Upscaling dvd player with divx

Pagina afdrukken

1. Connecting to a Display

Content of the output for each output jack is shown in the following table and differ depending on the On-Screen Display

Setting:

On-Screen Display Setting

"Video"

HDMI Output

Setting

RGB

Invalid

576p/480p

720p

HDMI

1080i

1080p

* Settings for HDMI output format are performed using the HDMI button on the remote control or HDMI SELECT button

on the front panel.

Note

• If Auto is selected, it follows preference HDMI aspect ratio of TV.

Connecting to Optional Equipment

You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.

• For connection to your TV, see "Connecting to a TV" .

• This section uses the following reference marks.

: Front speaker

: Rear speaker

: Sub woofer

: Center speaker

: Signal ﬂ ow

Notes

• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby Digital

Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL

DIGITAL AUDIO OUT jack of the DVD player.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the "DIGITAL (COAXIAL)" input of a Receiver or

Processor.

• Refer to the owner's manual of the connected equipment as well.

• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment

from the wall outlet before making any connections.

• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate

listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the ampliﬁ er before you connect or disconnect the DVD player's power cord. If you leave the ampliﬁ er power on,

the speakers may be damaged.

Content of output for each output jack

HDMI

Video

Output

Composite

576p/480p

Composite

720p

Composite

1080i

Composite

1080p

Composite

Output

RGB

Composite

Warning

• When you are connecting (via the COAXIAL DIGITAL

AUDIO OUT jack) an AV decoder that does not have

Dolby Digital, DTS

or MPEG2 decoding function, be

sure to set "Digital out" to "PCM" from the on-screen

displays. Otherwise, high volume sound may damage

your hearing as well as the speakers.

• When playing DTS-encoded discs (DVDs and audio

CDs), excessive noise may be output from the analog

audio output jacks. To avoid possible damage to the

audio system, you should take proper precautions

when the analog audio output jacks of the DVD player

are connected to an ampliﬁ cation system. To enjoy DTS

Digital Surround™ playback, an external 5.1 channel

DTS Digital Surround™ decoder system must be

connected to the COAXIAL DIGITAL AUDIO OUT jack

of the DVD player.