Toshiba HD-EP35KB Gebruikershandleiding - Pagina 38
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Toshiba HD-EP35KB. Toshiba HD-EP35KB 40 pagina's. Toshiba hd-ep35kb; hd-ep35ke hd dvd players
Ook voor Toshiba HD-EP35KB: Gebruikershandleiding (40 pagina's)
Pagina afdrukken
Customizing the function settings (Continued)
Clock Set
See
page 20.
OSD On/Off
To activate or deactivate the operational status display on the TV screen.
On
Off
Remote Controller Sound
To turn on or off the confi rmation beeper announcing when each remote command is received.
On
Off
HDMI Control (REGZA-Link)
To turn on or off the features offered with CEC (Consumer Electronics Control) when an HDMI device is connected to this player.
Use of HDMI Control which is a feature based on HDMI-CEC requires an HDMI-CEC compatible display device.
Enable HDMI
control
OneTouchPlay
SystemStandby
When complete, select "OK" then press OK button.
Notes
• Depending on the specifi cations of your TV, this function does not work even when your TV is HDMI-compatible.
• All the above features may not always work on all compatible TVs.
Maintenance
Initialize
Update (Firmware
update)
Persistent Storage To open the menu to control player's memory allocated for content. (Not available while a disc is loaded.)
Twin Format Disc
To select a layer to play, HD DVD or DVD of an HD DVD Twin Format Disc. (Not available if a disc is loaded.)
HD DVD
DVD
Note
• For combination discs, select the desired version by disc side (see label for information).
38
HD-EP35KE_Eng.indd 38
HD-EP35KE_Eng.indd 38
Activates the operational status display (e.g.,
Deactivates the operational status display (e.g.,
Turns on the beep sound.
Turns off the beep sound.
Select "On" to control this player using the remote control of your TV.
To disable this function, select "Off".
(Only when "Enable HDMI control" is set to "On")
Select "On" to turn the connected TV on if it is off and set its input to the player automatically to display the
player's picture, by pressing one of
To disable this function, select "Off".
(Only when "Enable HDMI control" is set to "On")
Select "On" to turn off both the player and the connected TV from the TV's remote control.
To disable this function, select "Off".
To reset all the settings listed on
Press
/
buttons to select "Yes" then press OK button.
If you have a broadband internet service, you may obtain fi rmware update over the internet using the LAN
port on the back of your player.
• BEFORE BEGINNING THE FIRMWARE UPDATE PROCESS, BE SURE TO REMOVE ANY DISCS
FROM YOUR PLAYER.
Please confi gure the LAN port (
• Press SETUP and select "General" > "Maintenance". Follow the instructions on the screen.
• If a fi rmware update is available for your player, the player will download it. Once the fi rmware update
dowload process has fi nished, the player's power will automatically switch off. You must wait until this
process has fi nished.
• DO NOT UNPLUG, TURN OFF, OR USE ANY OTHER FEATURE OF YOUR PLAYER DURING THE
FIRMWARE UPDATE PROCESS. Doing so will cause the writing of the fi rmware update to the player
to be halted and the player may no longer operate properly. If the player stops working, please contact
Toshiba customer service for your country or http://www.highdefi nitiondvd.eu/.
• If no fi mware update is available, the player will quickly exit the fi rmware update process.
The menu selections will vary depending on the content. Operate following the instructions displayed on
your screen.
Only the HD DVD layer is played.
Only the DVD layer is played.
) on the TV screen.
) on the TV screen.
(PLAY), MENU, RESUME PLAY, TOP MENU buttons.
page 30, 31 to factory set default.
page 17). You may need to turn on DHCP and DNS (
page 24).
07.8.30 11:19:59 PM
07.8.30 11:19:59 PM