Philips DCM2060 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Philips DCM2060. Philips DCM2060 21 pagina's. Micro music system with dock for ipod/iphone/ipad
Ook voor Philips DCM2060: Gebruikershandleiding (21 pagina's), Snelstarthandleiding (2 pagina's), Gebruikershandleiding (20 pagina's), Snelstarthandleiding (2 pagina's), Gebruikershandleiding (21 pagina's), Brochure (3 pagina's), Gebruikershandleiding (21 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (19 pagina's), Snelstarthandleiding (2 pagina's)

Pagina afdrukken
Philips DCM2060 Gebruikershandleiding
2
Press and hold
full scan.
» The unit automatically stores FM radio
stations with sufficient signal strength 
and then broadcasts the first preset 
station.
Tip
•
To exit storing mode, press

Set clock

1
In standby mode, press and hold CLOCK
SET on the remote control for two
seconds.
» [SET CLOCK] (set clock) scrolls on 
the display.
2
Press CLOCK SET again.
» The 12/24 hour format blinks.
3
Press
/
repeatedly to select hour
format.
4
Press CLOCK SET to confirm.
» The hour digits blink.
5
Repeat steps 3-4 to set the hour.
6
Repeat steps 3-4 to set the minute.
7
Repeat steps 3-4 to select whether to
synchronize time of this unit with RDS
stations.
[RDS TIME SYNC [N] ]: time
• 
synchronization is deactivated.
• 
[RDS TIME SYNC [Y] ]: the unit
synchronizes time from the RDS
stations automatically.
Note
•
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
•
If no button is pressed in 90 seconds, the unit exits
clock setting mode automatically.
for 3 seconds to start
or .

Turn on

Press .
» The unit switches to the last selected
source.
Note
•
To select a source, press SOURCE repeatedly or the
source selection buttons on the remote control.
Switch to standby mode
Press
again to switch the unit to standby
mode.
» The clock (if set) appears on the display 
panel.
EN
11