Philips DCM292 Gebruikershandleiding - Pagina 21

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Philips DCM292. Philips DCM292 22 pagina's. Sleek micro sound system dock for iphone/ipod
Ook voor Philips DCM292: Gebruikershandleiding (20 pagina's), Gebruikershandleiding (19 pagina's), Snelstarthandleiding (4 pagina's), Snelstarthandleiding (4 pagina's), Snelstarthandleiding (4 pagina's), Snelstarthandleiding (4 pagina's), Gebruikershandleiding (22 pagina's), Specificaties (3 pagina's), Beknopte handleiding (3 pagina's)

Pagina afdrukken

9 Troubleshooting

Warning

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair

the system yourself.

If you encounter problems when using this

apparatus, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips web site (www.

philips.com/welcome). When you contact

Philips, ensure that the apparatus is nearby

and the model number and serial number are

available.

No power

Ensure that the AC power plug of the

unit is connected properly.

Ensure that there is power at the AC

outlet.

To save power, the unit switches to Eco

Standby mode automatically after 15

minutes in standby mode.

No sound

Adjust the volume.

No response from the unit

Disconnect and reconnect the AC power

plug, then turn on the unit again.

No disc detected

Insert a disc.

Check if the disc is inserted with the print

side facing inward.

Wait until the moisture condensation at

the lens has cleared.

Replace or clean the disc.

Remote control does not work

select the correct source with the remote

control instead of the main unit.

Reduce the distance between the remote

control and the unit.

Insert the battery with its polarities (+/–

signs) aligned as indicated.

Replace the battery.

Aim the remote control directly at the

sensor on the front of the unit.

device has exceeded a certain limit. This

phenomenon is not a malfunction.

supported.

USB device not supported

The USB device is incompatible with the

unit. Try another one.

Poor radio reception

Increase the distance between the unit

and your TV or VCR.

Fully extend and adjust the FM antenna.

Clock/timer setting erased

Power has been interrupted or the power

cord has been disconnected.

Reset the clock/timer.

Timer does not work

Set the clock correctly.

Switch on the timer.