Toshiba TDP TDP-S8 Gebruikershandleiding - Pagina 19

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Toshiba TDP TDP-S8. Toshiba TDP TDP-S8 45 pagina's. Data projector

Preparing and using the remote control

■ Loading dry-cell batteries

into the remote control

 Remove the battery cover.

 Insert the dry-cell batteries.

Be sure to align the plus and minus

ends of the batteries properly.

Two batteries (R6, SIZE AA) are used.

 Replace the battery cover.

Dry-cell batteries

• Before using the batteries, be sure to observe the Safety Precautions described in

previous pages.

• Remove batteries from remote control when not using for extended periods.

• If the remote control stops working, or if its range decreases, replace all the batteries with

new ones.

The remote control

• The remote control may fail to operate if the infrared remote sensor is exposed to bright

sunlight or ﬂuorescent lighting.

• Do not drop or bang.

• Do not leave in hot or humid locations.

• Do not get wet or place on top of wet objects.

• Do not take apart.

• In rare cases, ambient conditions could impede the operation of the remote control. If this

happens, point the remote control at the main unit again, and repeat the operation.

■ Operating the remote

control

Point toward the projector's

infrared remote sensor, and press a

button on the remote control.

• Operating the projector from the front

Approx. 15