Toshiba TDP-MT100 Handmatig - Pagina 9

Blader online of download pdf Handmatig voor {categorie_naam} Toshiba TDP-MT100. Toshiba TDP-MT100 43 pagina's.

Component video connection

If your video device has component connectors, use the component to

S-video adapter. Plug the component cable into the video device. Plug the

other end of the component cable into the adapter and plug the adapter into

the projector's S-video connector. Use the audio adapter as described on the

previous page.

Component connection offer the highest quality video output.

If your video device has a 15-pin VGA output, plug one end of the included

computer cable to the VGA connector on your video source. This connector

may be labeled "To Monitor" on the video source. Plug the other end of the

cable into the Computer In connector on the projector.

Use the audio adapter as described on the previous page.

Connect the power cord to the Power connector on the side of the projector

and to your electrical outlet.

NOTE: Always use the power cord that shipped with the projector.

connect component cables via component

to S-video adapter and audio cables via

audio adapter

connect VGA cable and

audio cable via audio

adapter

connect power cable