Toshiba TDP-MT200 Gebruikershandleiding - Pagina 17
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Toshiba TDP-MT200. Toshiba TDP-MT200 44 pagina's. Dlp projector
Ook voor Toshiba TDP-MT200: Gebruikershandleiding (46 pagina's)
Pagina afdrukken
English
Français
Parts on the rear panel
Name
(1) Infrared remote sensor
(2) CONTROL terminal
(3) S-VIDEO terminal
(4) VIDEO terminal
(5) Component video terminal
(6) COMPUTER terminal
(7) DVI-D terminal
(8) Main power switch
(9) AC IN socket
(10) Antitheft lock hole
Notes
• Although this owner's manual abbreviates component video signals as Y/P
product also supports signals from video equipment marked "Y/C
• Input signal specifications for the DVI terminal complies with the DVI 1.0 Specifications.
• Please note that the operations for the functions not covered in these specifications are
not guaranteed. Because this is an evolving technology, it is possible that some devices
may not operate properly with the projector.
• This supports HDCP (High-bandwidth Digital Content Protection).
Español
Deutsch
(2)
(3)
(4)
(1)
(10)
: Main Function
: Senses commands from the remote control.
: When operating the projector via a computer, connect
this to the controlling computer's RS-232C port.
: Input S video signals from video equipment.
: Input video signals from video equipment.
: Input component video signal (Y/P
equipment or other source.
: Input RGB signal from a computer or other source.
: Input digital RGB signal from a computer or other
source.
: AC power line ON (standby)/OFF.
: Connect the supplied power cord here.
: Attach a safety cable or any other antitheft device.
Italiano
(5)
(6)
17
Português Svenska
(7)
(9)
(8)
p.18
p.43
/P
) from a video
B
R
/P
, the
B
R
/C
."
B
R