Toshiba TDP-MT700 Gebruikershandleiding - Pagina 22

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Toshiba TDP-MT700. Toshiba TDP-MT700 36 pagina's. Home theater projector
Ook voor Toshiba TDP-MT700: Gebruikershandleiding (34 pagina's), Servicehandleiding (49 pagina's)

Pagina afdrukken

1. Selecting a picture mode

Select a picture mode on the remote control (or in the Picture > Load

Settings menu). The following four modes are available for each

input, with preset values suitable for various projection purposes:

Dynamic

Standard

Theater 1

Theater 2

You also can customize the picture settings by adjusting the functions

in the Picture menu, and save those settings as USER MEMORY 1, 2,

or 3. For more information, refer to

2. Selecting a Screen Size

The aspect ratio is the ratio of image width to image height. HDTV and most DVDs are 16:9, which is

the default for this projector. Most TV shows are 4:3.

Change the image ratio using the SCREEN SIZE buttons on the remote control (or in the Display >

Screen Size menu). Select an aspect ratio to suit the format of the video signal. The following five

aspect ratios are available:

In the pictures below, the black portions are active areas and the white portions are inactive areas.

Full: Scales an image so

that it is displayed in the

center of the screen in

16:9 aspect ratio. This

mode is best for squeeze-signal video images.

4:3: Scales an image so

that it is displayed in the

center of the screen in 4:3

aspect ratio. This mode is

best for 4:3-signal video

images displayed on a 4:3 size screen.

Zoom: Enlarges an

image with letterbox

format to display it in full-

screen format in 16:9

aspect ratio. The upper

and lower portions of the

image are cropped. Use this setting for

Cinemascope and Vista video wide-screen

formats.

Notes

Using these functions to change the size of the displayed image (i.e. changing the height/width ratio

from the original) for purpose of public display or commercial gain may infringe on copyright laws.

Using the projector and remote control

p.27

Theater Wide®: A

4:3 aspect ratio

image is enlarged

NON-linearly in

horizontal direction

to accommodate 16:9 full-screen

display. This stretches only the right

and left sides of the image; the central

part is unchanged. This mode is best

for 4:3-signal video images displayed

on a wide screen.

Through:

Projects the input

signal in its

original size

(without any

scaling), with the image displayed at

the center of the screen.