Toshiba TDP-S35 Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Toshiba TDP-S35. Toshiba TDP-S35 25 pagina's. Brochure
Ook voor Toshiba TDP-S35: Specificaties (2 pagina's)
Names of each part on the document camera
(1)
(2)
(3)
(6) (7)
(4)
(8)
(5)
Name
: Function
(1) Camera head
: Document camera.
(2) Camera lens
: Shooting lens for the document camera.
(3) Focusing lever
: Adjusts the focus.
(4) Camera arm
: Adjusts the shooting angle.
(5) Lock lever
: Used when the document camera is detached from the
tray.
(6) CAMERA button
: Toggles between the camera input and previous input.
p.36
(7) CAMERA GAIN buttons
: Adjusts the camera gain.
(8) Tip resistant bar
: Pulled out when a camera is used separated from the
projector.
(9) Camera output terminal
: Used connect the supplied document camera cable to
(CAMERA OUT)
the COMPUTER IN (camera) terminal of the projector.
(10) Tray
: The document camera is mounted.
(11) Lock lever
: Locks the document camera onto the tray.
(12) Lock switch
: Used when the document camera is attached/detached
to/from the tray.
(TDP-SC35)
(10)
(9)
(11)
p.36
p.36
18
Preparing and using the remote control
■ Loading dry-cell batteries
into the remote control
q Remove the battery cover.
(12)
w Insert the dry-cell batteries.
Be sure to align the plus and minus
ends of the batteries properly.
Two batteries (R6, SIZE AA) are used.
e Replace the battery cover.
Dry-cell batteries
• Before using the batteries, be sure to observe the Safety Precautions described in
previous pages.
• Remove batteries from remote control when not using for extended periods.
• If the remote control stops working, or if its range decreases, replace all the batteries with
new ones.
The remote control
• The remote control may fail to operate if the infrared remote sensor is exposed to bright
sunlight or fluorescent lighting.
• Do not drop or bang.
• Do not leave in hot or humid locations.
• Do not get wet or place on top of wet objects.
• Do not take apart.
• In rare cases, ambient conditions could impede the operation of the remote control. If this
happens, point the remote control at the main unit again, and repeat the operation.
■ Operating the remote
control
Point the remote control toward the
projector's infrared remote sensor,
and press a button on the remote
control.
• Operating the projector from the front
Approx. 15°
• Operating the projector from the rear
Approx. 15°
19